-40%

Accuton C173-6-197 7 inch 6 ohm Ceramic Bass – Midrange driver. Neodymium magnet

$ 321.11

Availability: 100 in stock
  • Compatible Brand: Universal
  • All returns accepted: ReturnsNotAccepted
  • Brand: Accuton
  • Type: Woofer
  • Condition: New
  • MPN: Does Not Apply

    Description

    Accuton C173-6-197 7 inch 6 ohm Ceramic Bass – Midrange driver. Neodymium magnet
    The Accuton C173-6-197 Bass / Midrange is an esoteric 7 inch unit primarily intended for high end 2 and 3 way designs.
    This superb driver features a ceramic (Sapphire) cone, soft rubber surround and a cutting edge low distortion motor system comprising an Aluminium ringed Neodymium magnet and 56mm titanium voice coil former. Sensitivity is high at 91 dB broadening the scope of application.
    The spider, pole and voice coil former are fully ventilated for minimal compression. This 6 ohm unit has a power rating of 120 watts .
    Full datasheets can be downloaded from the bottom of this page.
    Here are some box alignment examples:
    Vented:
    Vb: 11L, Fres: 25Hz with passive radiator, -15dB @ 25Hz, Q: 0.38 (optimal A/V alignment)
    Vb: 9L, Port diameter: 50mm, Length: 153mm, Fres: 58Hz, F-3dB: 60Hz, Q: 0.40 (optimal flat)
    Vb: 12L, Port diameter: 50mm, Length: 132mm, Fres: 53Hz, F-3dB: 45Hz, Q: 0.37 (extended bass)
    Infinite baffle:
    Vb: 4.6L, -15dB @ 40Hz, F-3dB: 145Hz, Q: 0.50 (clean transient response)
    Vb: 10.6L, -13dB @ 40Hz, F-3dB: 144Hz, Q: 0.38 (extended bass for active systems)
    Key Features:
    Ultra hard ceramic cone (Corundum / Sapphire)
    173mm diameter chassis with protective grille
    High power 56mm voice coil assembly
    Underhung motor, titanium VC former
    35 Hz – 3 KHz in vented box
    Large Neodymium magnet
    Long throw max. 10mm
    Basic Parameters:
    Resonant frequency (fs)
    35Hz
    DC resistance (Re)
    5.7?
    Mechanical Q factor (Qms)
    4.48
    Power handling
    120W
    Electrical Q factor (Qes)
    0.25
    Sensitivity (2.83V/1m)
    91dB
    Total Q factor (Qts)
    0.24
    Chassis diameter
    173mm
    Equivalent volume (Vas)
    30.5L
    Cutout diameter
    146mm
    Conditions
    Handling time - 5 to 21 days
    Fast shipping in europe on special orders.
    Customs - No custom fees / Ask about invoice declaration
    Condition - New straight from the factory
    Items location - EUROPE
    Shipping - to the whole world.
    Payment
    We accept the following payment methods:
    Paypal
    Please contact us if you have any questions.
    Service
    FOR THE BEST SHIPPING PRICE PLEASE ADD YOUR ITEMS TO CART AND REQUEST TOTAL FROM THE SELLER