1/2" Sharkbite Style Push-Fit x 3/4" MNPT Lead-Free Brass Male Threaded Adapter

Description

Customer Service & Technical Support
Mon-Fri, 9.00am - 6.00pm EST
WE COMBINE SHIPPING
LOWEST PRICE GUARANTEED
ONLY BRAND NEW PRODUCTS
Add PexTubingStore to Favorites
1/2" Push to Connect (Push-Fit) x 3/4" MNPT Lead-Free Brass Reducing Adapter
Push to Connect (Push-Fit) Adapter connects CTS pipe to a female threaded fitting or an outlet.
For use with 1/2" CTS (5/8” OD) & 3/4" CTS (7/8” OD) PEX, copper, CPVC and PE-RT pipes.
Lead-free DZR (dezincification resistant) brass, approved for potable water use nationwide.
NSF/ANSI 14, 61 & 372, ASSE 1061 listed.
cUPC (Uniform Plumbing Code) listed.
Rated up to 100 psi at 180°F for continuous use.
PEX insert/stiffener included.
Replaces SharkBite, TecTite, ProBite and other push fitting brands.
Advantages of push fittings:
No crimp/clamp/soldering tools required.
No crimp rings or clamps required.
No need to gauge connections for accuracy.
No soldering needed (and no open flame).
No gluing.
Easily transition between PEX, copper and CPVC.
Faster and easier than any common connection method.
Installation with PEX tubing:
Make a clean and square cut using a
plastic pipe cutter
.
Mark insertion depth using U702 tool or measuring tape (see chart below).
Fully insert pipe into the fitting and check the insertion depth.
Installation with Copper pipe:
Cut the pipe using a standard copper pipe cutter (do not use hacksaw or band saw).
Ream the outside and inside of the copper pipe to smooth out its edge (use U702 or similar tool).
Mark insertion depth using
U702 tool
or measuring tape (see chart below).
Remove the PEX insert from the fitting using a
disconnect clip
and needlenose pliers.
Fully insert pipe into the fitting and check the insertion depth.
Installation with CPVC pipe:
Cut the pipe using a standard pipe cutter. If using a hacksaw – ream the pipe’s edges.
Mark insertion depth using
U702 tool
or measuring tape (see chart below).
Remove the PEX insert from the fitting using a
disconnect clip
and needlenose pliers.
Fully insert pipe into the fitting and check the insertion depth.
Pipe insertion depth chart:
Pipe Size (CTS/Nominal)
Pipe Size (OD)
Insertion Depth
1/4"
3/8"
13/16"
3/8"
1/2"
15/16"
1/2"
5/8"
15/16"
3/4"
7/8"
1-1/8"
1"
1-1/8"
1-5/16"
To disconnect:
Use disconnect clip of size corresponding to CTS pipe size. Snap the clip over the pipe near the fitting and push it down on the innermost collar of the fitting (which comes in contact with the pipe), while simultaneously pulling the pipe and fitting apart.
DO’s:
Always pressure test the system after installation
Cut the pipe gradually. With copper pipe especially, excessive force may deform otherwise round pipe shape.
If using with copper pipe, reaming is a must – it will prevent damage to the O-ring from abrasive edges.
PEX insert is required when installing the fitting on a PEX pipe.
DONT’s:
Do not sand the pipe or apply any kind of glue or sealing tape.
Do not install in glycol containing systems (i.e. snow/ice melting systems).
Do not re-use fittings on different connections.
Do not use on soft and rolled copper – only hard drawn standard K, L, M copper pipes.
Note: push fittings are not compatible with PEX-AL-PEX, PB (PolyButylene), PVC pipes and cannot be used for air/gas/oil applications.
Browse our store for complete selection of push to connect fittings:
Elbows
Male Threaded Elbows
Female Threaded Elbows
Female Threaded Swivel Elbows
Drop Ear Elbows
Plugs (Caps)
Couplings
Male Threaded Adapters
Female Threaded Adapters
Female Threaded Swivel Adapters
Slip Couplings
Ball Valves
Tees
Slip Tees
Female Threaded Tees
Disconnect Clips
& Tools
PEX Inserts (Stiffeners)
PAYMENTS:
We prefer PayPal and accept all major Credit Cards (Visa, MasterCard, American Express and Discover) as well as debit cards.
Payment for all purchases is due within 5 business days from the date of purchase. Unpaid orders will be cancelled.
For assistance with payment questions, quotes and volume discounts, contact our Customer Support during normal business hours.
SHIPPING INFO:
We combine shipping
. For details, see our
Shipping Policy
.
All orders are usually shipped the same business day if placed before 3pm EST. Shipment days are Monday through Friday.
Tracking information is sent to you automatically at the time of shipment and is always available if needed.
All orders are inspected prior to shipment and are insured against loss or damage in transit.
For estimated delivery dates, see
Transit Times
.
CUSTOMER SERVICE:
Our friendly and knowledgeable staff is here to serve your needs.
Contact us if you have any questions or need any assistance with your purchase.
Our store hours are Monday through Friday, 9.00am - 6.00pm Eastern Standard Time.
Contact us:
To send us a message click here
Visit our store:
Pex Tubing Store
EASY RETURNS:
We have a 30-day, 100% Money-Back Satisfaction Guarantee that we offer to our Customers.
See "Shipping and Payments" tab below main product picture for return policy on this product.
RMA# is required for all returns. Buyer is responsible for return shipping charges. Processing time: 3-5 business days upon receipt.
Product(s) must be returned in original condition, undamaged, unopened, unused, uncut.
For details and complete return instructions, see our store
Return Policy
.